Rhino Single Port T1/E1 Card

enlarge

Managing your open source telecommunication needs has never been easier than with Rhino products. Rhino PCIplug-in cards satisfy the needs of Open Source Telephony (OST) applications,no matter how stringent the requirement. Rhino Open Source Telephony PCI cards feature Asteriskand Linux tested software. Knowing that Rhino products are ready to perform right out of the boxmeans that you can spend more time developing important customer relationships.

Rhino Equipment Corp. offers you a complete line of low cost PCI plug-in cards including Single T1/E1, Dual T1/E1, Quad T1/E1, Quad FXO analog, Octal FXS/FXO and 24-port analog mixed mode analog interfaces. And don?€™t forget the full line of Rhino Channel Bank products, forlarge scale analog FXS or FXO applications.

Using Asterisk? Rhino Open Source Telephony PCI products allow you to utilize analog phonesand wiring in conjunction with leading-edge Asterisk technology -- without having to buy expensive IP telephones. Why go IP when you can save on installations by using your proven existing wiring?With Rhino you can use lower cost analog phones with digital features and get guaranteed T1 voicequality, all while enjoying Asterisk VoIPtechnology for off-premise connectivity.

Rhino products are tough. In the rare case of trouble, our technical support staff is ready to giveyou the support you need, when you need it. Our 5-year, limited warranty means that you can beconfident that Rhino will always work hard in your Open Source Telephony application.

Rhino Equipment Corp. T1/E1 PCI Plug-In Card Specifications

PCI Card Features

• Asterisk soft PBX tested and ready
• Zaptel-compliant open source Linux module source code
• T1/E1 embedded CSU for the single T1
• Line buildout software selectable
• Custom Rhino PCI interface chip means no excess CPU overhead
• Fractional voice and data capable
• Field software upgradable
• T1 crossover cables included
• Alarm and Link status LEDs visible from the rear bracket
• All major signaling modes supported (E&M, PRI, Loop,Ground, Kewl, etc.)
• Loopstart signaling for advanced features such as Caller ID and Distinctive Ring
• 5-year limited warranty

Benefits

Rhino Equipment Corp. provides a flexible and reliable product line to satisfy all T1, E1 and analog needs. Our products will beat your expectations, or your money back - guaranteed.

Our limited 5-year warranty means that you do not have to worry about your investment while it is in use - we do that for you.

CSU Features

All Rhino PCI T1/E1 cards feature a single chip integrated CSU with both LIU and Framer, that is software controlled and software programmable - no jumpers

• Complete T1/DS1/ISDN-PRI/BRI transceiver functionality
• Complete E1 (CEPT) PCM-30/ISDN-PRI/BRI transceiver functionality
• Long-haul and short haul line interface for clock/data recovery and wave shaping
• Crystal-less jitter attenuator for the single T1
• Fully independent transmit and receive functionality
• Single chip line interface unit (LIU) and Framer

Zaptel Selections

• T1 or E1
• T1: D4 or ESF, AMI or B8ZS
• E1: CAS or CCS, AMI orHDB3
• Line buildouts selections: 0-133feet or 0db, 133-266 feet, 266-399 feet, 399-533 feet, 533-655feet, -7.5db, -15db, -22.5db
• Loopback configurable using Zaptel tools (i.e. zttool)
• Mechanical Data Size: 2.5?€? tall, 4.75?€? wide Form Factor: Single PCI slot Shipping Weight: 1 pound withall included components maximum

Compatible Rhino Channel Bank Models

• CB24-FXS-110V- T1, 24 FXS analog channels, 110VAC
• CB24-FXS-220V- T1, 24 FXS analog channels, 220VAC
• CB24-FXS-48V- T1, 24 FXS analog channels, -48VDC
• CB24-FXO-110V- T1, 24 FXO analog channels, 110VAC
• CB24-FXO-220V- T1, 24 FXO analog channels, 220VAC
• CB24-FXO-48V- T1, 24 FXO analog channels, -48VDC for the single T1
• CB24-MOD-110V- T1, 4-24 FXS/FXO analog channels, 110VAC
• CB24-MOD-220V- T1, 4-24 FXS/FXO analog channels, 220VAC
• CB24-MOD-48V- T1, 4-24 FXS/FXO analog channels, -48VDC

Price: £274.00